HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Configur - Page 51
Con Device B, enable DLDP on it.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
[DeviceA-GigabitEthernet1/1/4] duplex full [DeviceA-GigabitEthernet1/1/4] speed 1000 [DeviceA-GigabitEthernet1/1/4] dldp enable [DeviceA-GigabitEthernet1/1/4] quit # Set the DLDP mode to enhanced. [DeviceA] dldp work-mode enhance # Set the port shutdown mode to manual. [DeviceA] dldp unidirectional-shutdown manual 2. Configure Device B: # Enable DLDP globally. system-view [DeviceB] dldp enable # Configure GigabitEthernet 1/1/3 to operate in full duplex mode and at 1000 Mbps, and enable DLDP on it. [DeviceB] interface gigabitethernet 1/1/3 [DeviceB-GigabitEthernet1/1/3] duplex full [DeviceB-GigabitEthernet1/1/3] speed 1000 [DeviceB-GigabitEthernet1/1/3] dldp enable [DeviceB-GigabitEthernet1/1/3] quit # Configure GigabitEthernet 1/1/4 to operate in full duplex mode and at 1000 Mbps, and enable DLDP on it. [DeviceB] interface gigabitethernet 1/1/4 [DeviceB-GigabitEthernet1/1/4] duplex full [DeviceB-GigabitEthernet1/1/4] speed 1000 [DeviceB-GigabitEthernet1/1/4] dldp enable [DeviceB-GigabitEthernet1/1/4] quit # Set the DLDP mode to enhanced. [DeviceB] dldp work-mode enhance # Set the port shutdown mode to manual. [DeviceB] dldp unidirectional-shutdown manual 3. Verify the configuration: After the configurations are complete, you can use the display dldp command to display the DLDP configuration information on ports. # Display the DLDP configuration information on all the DLDP-enabled ports of Device A. [DeviceA] display dldp DLDP global status : enable DLDP interval : 5s DLDP work-mode : enhance DLDP authentication-mode : none DLDP unidirectional-shutdown : manual DLDP delaydown-timer : 1s The number of enabled ports is 2. Interface GigabitEthernet1/1/3 DLDP port state : advertisement DLDP link state : up 44