HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Configur - Page 198
Con VRRP on Switch B, Verify the configuration
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
# Set the authentication mode of VRRP group 1 to simple, and the authentication key to hello. [SwitchA-Vlan-interface2] vrrp vrid 1 authentication-mode simple hello # Configure the master to send VRRP packets at an interval of five seconds. [SwitchA-Vlan-interface2] vrrp vrid 1 timer advertise 5 # Configure Switch A to operate in preemptive mode, and set the preemption delay to five seconds. [SwitchA-Vlan-interface2] vrrp vrid 1 preempt-mode timer delay 5 # Configure to monitor track entry 1, and specify the priority decrement to 30. [SwitchA-Vlan-interface2] vrrp vrid 1 track 1 reduced 30 5. Configure VRRP on Switch B: system-view [SwitchB] interface vlan-interface 2 # Create VRRP group 1, and configure the virtual IP address 10.1.1.10 for the group. [SwitchB-Vlan-interface2] vrrp vrid 1 virtual-ip 10.1.1.10 # Set the authentication mode of VRRP group 1 to simple, and the authentication key to hello. [SwitchB-Vlan-interface2] vrrp vrid 1 authentication-mode simple hello # Configure the master to send VRRP packets at an interval of five seconds. [SwitchB-Vlan-interface2] vrrp vrid 1 timer advertise 5 # Configure Switch B to operate in preemptive mode, and set the preemption delay to five seconds. [SwitchB-Vlan-interface2] vrrp vrid 1 preempt-mode timer delay 5 6. Verify the configuration: After configuration, ping Host B on Host A, and you can see that Host B is reachable. Use the display vrrp command to view the configuration result. # Display detailed information about VRRP group 1 on Switch A. [SwitchA-Vlan-interface2] display vrrp verbose IPv4 Standby Information: Run Mode : Standard Run Method : Virtual MAC Total number of virtual routers : 1 Interface Vlan-interface2 VRID : 1 Adver Timer : 5 Admin Status : Up State : Master Config Pri : 110 Running Pri : 110 Preempt Mode : Yes Delay Time : 5 Auth Type : Simple Key : ****** Virtual IP : 10.1.1.10 Virtual MAC : 0000-5e00-0101 Master IP : 10.1.1.1 VRRP Track Information: Track Object : 1 State : Positive Pri Reduced : 30 # Display detailed information about VRRP group 1 on Switch B. [SwitchB-Vlan-interface2] display vrrp verbose IPv4 Standby Information: Run Mode : Standard Run Method : Virtual MAC 191