HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Configur - Page 67

Specifying an assistant-edge node, Activating an RRPP domain

Get HP 6125G PDF manuals and user guides View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

To specify an edge node: Step 1. Enter system view. Command system-view 2. Enter RRPP domain view. rrpp domain domain-id 3. Specify the current device as a master node or ring ring-id node-mode { master | transit } transit node of the primary ring, and specify the [ primary-port interface-type interface-number ] primary port and the secondary port. [ secondary-port interface-type interface-number ] level level-value 4. Specify the current device as the edge node of a ring ring-id node-mode edge [ edge-port subring, and specify the edge port. interface-type interface-number ] Specifying an assistant-edge node When configuring an assistant-edge node, you must first configure the primary ring before configuring the subrings. Perform this configuration on a device to be configured as an assistant-edge node. To specify an assistant-edge node: Step Command 1. Enter system view. system-view 2. Enter RRPP domain view. rrpp domain domain-id 3. Specify the current device as a master node or ring ring-id node-mode { master | transit } transit node of the primary ring, and specify the [ primary-port interface-type interface-number ] primary port and the secondary port. [ secondary-port interface-type interface-number ] level level-value 4. Specify the current device as the assistant-edge ring ring-id node-mode assistant-edge [ edge-port node of the subring, and specify an edge port. interface-type interface-number ] Activating an RRPP domain To activate an RRPP domain on the current device, enable the RRPP protocol and RRPP rings for the RRPP domain on the current device. To prevent Hello packets of subrings from being looped on the primary ring, enable the primary ring on its master node before enabling the subrings on their separate master nodes. On an edge node or assistant-edge node, enable/disable the primary ring and subrings separately: • Enable the primary ring of an RRPP domain before enabling the subrings of the RRPP domain. • Disable the primary ring of an RRPP domain after disabling all subrings of the RRPP domain. Perform this operation on all nodes in the RRPP domain. To activate an RRPP domain: Step 1. Enter system view. 2. Enable RRPP. Command system-view rrpp enable Remarks N/A Disabled by default. 60

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
60
To specify an edge node:
Step
Command
1.
Enter system view.
system-view
2.
Enter RRPP domain view.
rrpp domain
domain-id
3.
Specify the current device as a master node or
transit node of the primary ring, and specify the
primary port and the secondary port.
ring
ring-id
node-mode
{
master
|
transit
}
[
primary-port
interface-type interface-number
]
[
secondary-port
interface-type interface-number
]
level
level-value
4.
Specify the current device as the edge node of a
subring, and specify the edge port.
ring
ring-id
node-mode
edge
[
edge-port
interface-type interface-number
]
Specifying an assistant-edge node
When configuring an assistant-edge node, you must first configure the primary ring before configuring
the subrings.
Perform this configuration on a device to be configured as an assistant-edge node.
To specify an assistant-edge node:
Step
Command
1.
Enter system view.
system-view
2.
Enter RRPP domain view.
rrpp domain
domain-id
3.
Specify the current device as a master node or
transit node of the primary ring, and specify the
primary port and the secondary port.
ring
ring-id
node-mode
{
master
|
transit
}
[
primary-port
interface-type interface-number
]
[
secondary-port
interface-type interface-number
]
level
level-value
4.
Specify the current device as the assistant-edge
node of the subring, and specify an edge port.
ring
ring-id
node-mode
assistant-edge
[
edge-port
interface-type interface-number
]
Activating an RRPP domain
To activate an RRPP domain on the current device, enable the RRPP protocol and RRPP rings for the RRPP
domain on the current device.
To prevent Hello packets of subrings from being looped on the primary ring, enable the primary ring on
its master node before enabling the subrings on their separate master nodes. On an edge node or
assistant-edge node, enable/disable the primary ring and subrings separately:
•
Enable the primary ring of an RRPP domain before enabling the subrings of the RRPP domain.
•
Disable the primary ring of an RRPP domain after disabling all subrings of the RRPP domain.
Perform this operation on all nodes in the RRPP domain.
To activate an RRPP domain:
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enable RRPP.
rrpp enable
Disabled by default.