HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Configur - Page 116
Configuration procedure, VLANs for smart link group 1.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Figure 26 Network diagram Configuration procedure 1. Configure Device C: # Create VLANs 1 through 30, map these VLANs to MSTI 1, and activate MST region configuration. system-view [DeviceC] vlan 1 to 30 [DeviceC] stp region-configuration [DeviceC-mst-region] instance 1 vlan 1 to 30 [DeviceC-mst-region] active region-configuration [DeviceC-mst-region] quit # Disable the spanning tree feature on GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 separately, configure them as trunk ports, and assign them to VLANs 1 through 30. [DeviceC] interface gigabitethernet 1/0/1 [DeviceC-GigabitEthernet1/0/1] undo stp enable [DeviceC-GigabitEthernet1/0/1] port link-type trunk [DeviceC-GigabitEthernet1/0/1] port trunk permit vlan 1 to 30 [DeviceC-GigabitEthernet1/0/1] quit [DeviceC] interface gigabitethernet 1/0/2 [DeviceC-GigabitEthernet1/0/2] undo stp enable [DeviceC-GigabitEthernet1/0/2] port link-type trunk [DeviceC-GigabitEthernet1/0/2] port trunk permit vlan 1 to 30 [DeviceC-GigabitEthernet1/0/2] quit # Create smart link group 1, and configure all the VLANs mapped to MSTI 1 as the protected VLANs for smart link group 1. [DeviceC] smart-link group 1 [DeviceC-smlk-group1] protected-vlan reference-instance 1 # Configure GigabitEthernet 1/0/1 as the master port and GigabitEthernet 1/0/2 as the slave port for smart link group 1. [DeviceC-smlk-group1] port gigabitethernet 1/0/1 master [DeviceC-smlk-group1] port gigabitethernet 1/0/2 slave # Enable the smart link group to transmit flush messages. [DeviceC-smlk-group1] flush enable [DeviceC-smlk-group1] quit 109