HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Configur - Page 69
Configuration procedure, Displaying and maintaining RRPP, RRPP configuration examples
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Configuration procedure To configure an RRPP ring group: Step 1. Enter system view. 2. Create an RRPP ring group and enter RRPP ring group view. 3. Assign the specified subrings to the RRPP ring group. Command system-view rrpp ring-group ring-group-id domain domain-id ring ring-id-list Displaying and maintaining RRPP Task Command Remarks Display brief RRPP information. display rrpp brief [ | { begin | exclude | include } regular-expression ] Available in any view Display RRPP group configuration information. display rrpp ring-group [ ring-group-id ] [ | { begin | exclude | include } regular-expression ] Available in any view Display detailed RRPP information. display rrpp verbose domain domain-id [ ring ring-id ] [ | { begin | exclude | include } regular-expression ] Available in any view Display RRPP statistics. display rrpp statistics domain domain-id [ ring ring-id ] [ | { begin | exclude | include } regular-expression ] Available in any view Clear RRPP statistics. reset rrpp statistics domain domain-id [ ring ring-id ] Available in user view RRPP configuration examples Single ring configuration example Networking requirements As shown in Figure 18, • Device A, Device B, Device C, and Device D form RRPP domain 1. Specify the primary control VLAN of RRPP domain 1 as VLAN 4092. RRPP domain 1 protects VLANs 1 through 30. • Device A, Device B, Device C, and Device D form primary ring 1. • Specify Device A as the master node of primary ring 1, GigabitEthernet 1/0/1 as the primary port and GigabitEthernet 1/0/2 as the secondary port. 62