HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Configur - Page 109
Configuration procedure, Network diagram
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Figure 24 Network diagram Configuration procedure 1. Configure Device C: # Create VLAN 1 through VLAN 200. Map VLANs 1 through 100 to MSTI 1. Map VLANs 101 through 200 to MSTI 2, and activate MST region configuration. system-view [DeviceC] vlan 1 to 200 [DeviceC] stp region-configuration [DeviceC-mst-region] instance 1 vlan 1 to 100 [DeviceC-mst-region] instance 2 vlan 101 to 200 [DeviceC-mst-region] active region-configuration [DeviceC-mst-region] quit # Shut down GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2, disable the spanning tree feature on GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 separately, configure the ports as trunk ports, and assign them to VLAN 1 through VLAN 200. [DeviceC] interface gigabitethernet 1/0/1 [DeviceC-GigabitEthernet1/0/1] shutdown [DeviceC-GigabitEthernet1/0/1] undo stp enable [DeviceC-GigabitEthernet1/0/1] port link-type trunk [DeviceC-GigabitEthernet1/0/1] port trunk permit vlan 1 to 200 [DeviceC-GigabitEthernet1/0/1] quit [DeviceC] interface gigabitethernet 1/0/2 [DeviceC-GigabitEthernet1/0/2] shutdown [DeviceC-GigabitEthernet1/0/2] undo stp enable [DeviceC-GigabitEthernet1/0/2] port link-type trunk [DeviceC-GigabitEthernet1/0/2] port trunk permit vlan 1 to 200 [DeviceC-GigabitEthernet1/0/2] quit # Create smart link group 1, and configure all VLANs mapped to MSTI 1 as the protected VLANs for smart link group 1. [DeviceC] smart-link group 1 [DeviceC-smlk-group1] protected-vlan reference-instance 1 # Configure GigabitEthernet 1/0/1 as the master port and GigabitEthernet 1/0/2 as the slave port for smart link group 1. [DeviceC-smlk-group1] port gigabitethernet1/0/1 master [DeviceC-smlk-group1] port gigabitethernet1/0/2 slave 102