HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Configur - Page 32
Configuration procedure, Create MD_A level 5 on Device B, create MA_A that serves VLAN 100, in MD_A
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Figure 6 Network diagram Configuration procedure 1. Configure a VLAN and assign ports to it: On each device shown in Figure 6, create VLAN 100 and assign ports GigabitEthernet 1/0/1 through GigabitEthernet 1/0/4 to VLAN 100. 2. Enable CFD: # Enable CFD on Device A. system-view [DeviceA] cfd enable Enable CFD on Device B through Device E using the same method. 3. Configure service instances: # Create MD_A (level 5) on Device A, create MA_A, which serves VLAN 100, in MD_A, and create service instance 1 for MD_A and MA_A. [DeviceA] cfd md MD_A level 5 [DeviceA] cfd ma MA_A md MD_A vlan 100 [DeviceA] cfd service-instance 1 md MD_A ma MA_A Configure Device E as you configure Device A. # Create MD_A (level 5) on Device B, create MA_A that serves VLAN 100, in MD_A, and then create service instance 1 for MD_A and MA_A. In addition, create MD_B (level 3) and MA_B that serves VLAN 100, in MD_B, and then create service instance 2 for MD_B and MA_B. [DeviceB] cfd md MD_A level 5 [DeviceB] cfd ma MA_A md MD_A vlan 100 [DeviceB] cfd service-instance 1 md MD_A ma MA_A [DeviceB] cfd md MD_B level 3 [DeviceB] cfd ma MA_B md MD_B vlan 100 [DeviceB] cfd service-instance 2 md MD_B ma MA_B Configure Device D in the same way as Device B. # Create MD_B (level 3) on Device C, create MA_B that serves VLAN 100, in MD_B, and then create service instance 2 for MD_B and MA_B. [DeviceC] cfd md MD_B level 3 25