HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Configur - Page 202
The output shows that when the status of the track entry becomes Positive, Switch A is the master
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
Become Master : 2200ms left Auth Type : None Virtual IP : 192.168.0.10 Master IP : 192.168.0.101 VRRP Track Information: Track Object : 1 State : Positive Switchover # Display information about track entry 1 on Switch B. display track 1 Track ID: 1 Status: Positive Duration: 0 days 0 hours 0 minutes 32 seconds Notification delay: Positive 0, Negative 0 (in seconds) Reference object: BFD session: Packet type: Echo Interface : Vlan-interface2 Remote IP : 192.168.0.101 Local IP : 192.168.0.102 The output shows that when the status of the track entry becomes Positive, Switch A is the master, and Switch B the backup. # Enable VRRP state debugging and BFD event debugging on Switch B. terminal debugging terminal monitor debugging vrrp state debugging bfd event # When Switch A fails, the following output is displayed on Switch B. *Dec 17 14:44:34:142 2008 SwitchB BFD/7/EVENT:Send sess-down Msg, [Src:192.168.0.102,Dst:192.168.0.101,Vlan-interface2,Echo], instance:0, protocol:Track *Dec 17 14:44:34:144 2008 SwitchB VRRP/7/DebugState: IPv4 Vlan-interface2 | Virtual Router 1 : Backup --> Master reason: The status of the tracked object changed # Display the detailed information about the VRRP group on Switch B. display vrrp verbose IPv4 Standby Information: Run Mode : Standard Run Method : Virtual MAC Total number of virtual routers : 1 Interface Vlan-interface2 VRID : 1 Adver Timer : 1 Admin Status : Up State : Master Config Pri : 100 Running Pri : 100 Preempt Mode : Yes Delay Time : 0 Auth Type : None Virtual IP : 192.168.0.10 Virtual MAC : 0000-5e00-0101 Master IP : 192.168.0.102 VRRP Track Information: Track Object : 1 State : Negative Switchover 195