HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Configur - Page 90
port as a trunk port, and assign it to VLAN 1.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
[DeviceB-GigabitEthernet1/0/2] undo link-delay [DeviceB-GigabitEthernet1/0/2] undo stp enable [DeviceB-GigabitEthernet1/0/2] qos trust dot1p [DeviceB-GigabitEthernet1/0/2] port link-type trunk [DeviceB-GigabitEthernet1/0/2] port trunk permit vlan 1 2 [DeviceB-GigabitEthernet1/0/2] quit # Cancel the physical state change suppression interval setting on GigabitEthernet 1/0/3, disable the spanning tree feature, and set the trusted packet priority type to 802.1p priority. Configure the port as a trunk port, and assign it to VLAN 2. [DeviceB] interface gigabitethernet 1/0/3 [DeviceB-GigabitEthernet1/0/3] undo link-delay [DeviceB-GigabitEthernet1/0/3] undo stp enable [DeviceB-GigabitEthernet1/0/3] qos trust dot1p [DeviceB-GigabitEthernet1/0/3] port link-type trunk [DeviceB-GigabitEthernet1/0/3] port trunk permit vlan 2 [DeviceB-GigabitEthernet1/0/3] quit # Cancel the physical state change suppression interval setting on GigabitEthernet 1/0/4, disable the spanning tree feature, and set the trusted packet priority type to 802.1p priority. Configure the port as a trunk port, and assign it to VLAN 1. [DeviceB] interface gigabitethernet 1/0/4 [DeviceB-GigabitEthernet1/0/4] undo link-delay [DeviceB-GigabitEthernet1/0/4] undo stp enable [DeviceB-GigabitEthernet1/0/4] qos trust dot1p [DeviceB-GigabitEthernet1/0/4] port link-type trunk [DeviceB-GigabitEthernet1/0/4] port trunk permit vlan 1 [DeviceB-GigabitEthernet1/0/4] quit # Create RRPP domain 1. Configure VLAN 100 as the primary control VLAN of RRPP domain 1, and configure the VLAN mapped to MSTI 1 as the protected VLAN of RRPP domain 1. [DeviceB] rrpp domain 1 [DeviceB-rrpp-domain1] control-vlan 100 [DeviceB-rrpp-domain1] protected-vlan reference-instance 1 # Configure Device B as a transit node of primary ring 1 in RRPP domain 1, with GigabitEthernet 1/0/1 as the primary port and GigabitEthernet 1/0/2 as the secondary port, and enable ring 1. [DeviceB-rrpp-domain1] ring 1 node-mode transit primary-port gigabitethernet 1/0/1 secondary-port gigabitethernet 1/0/2 level 0 [DeviceB-rrpp-domain1] ring 1 enable # Configure Device B as the assistant-edge node of subring 3 in RRPP domain 1, with GigabitEthernet 1/0/4 as the edge port, and enable subring 3. [DeviceB-rrpp-domain1] ring 3 node-mode assistant-edge edge-port gigabitethernet 1/0/4 [DeviceB-rrpp-domain1] ring 3 enable [DeviceB-rrpp-domain1] quit # Create RRPP domain 2. Configure VLAN 105 as the primary control VLAN of RRPP domain 2, and configure the VLAN mapped to MSTI 2 as the protected VLAN of RRPP domain 2. [DeviceB] rrpp domain 2 [DeviceB-rrpp-domain2] control-vlan 105 [DeviceB-rrpp-domain2] protected-vlan reference-instance 2 83