HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Configur - Page 117
Create monitor link group 1, and then con GigabitEthernet 1/0/1 as an uplink port
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
2. Configure Device A: # Create VLANs 1 through 30. system-view [DeviceA] vlan 1 to 30 # Configure GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 as trunk ports, assign them to VLANs 1 through 30, and enable flush message receiving on them. [DeviceA] interface gigabitethernet 1/0/1 [DeviceA-GigabitEthernet1/0/1] port link-type trunk [DeviceA-GigabitEthernet1/0/1] port trunk permit vlan 1 to 30 [DeviceA-GigabitEthernet1/0/1] smart-link flush enable [DeviceA-GigabitEthernet1/0/1] quit [DeviceA] interface gigabitethernet 1/0/2 [DeviceA-GigabitEthernet1/0/2] port link-type trunk [DeviceA-GigabitEthernet1/0/2] port trunk permit vlan 1 to 30 [DeviceA-GigabitEthernet1/0/2] smart-link flush enable [DeviceA-GigabitEthernet1/0/2] quit 3. Configure Device B: # Create VLANs 1 through 30. system-view [DeviceB] vlan 1 to 30 # Configure GigabitEthernet 1/0/1 as a trunk port, assign it to VLANs 1 through 30, and enable flush message receiving on it. [DeviceB] interface gigabitethernet 1/0/1 [DeviceB-GigabitEthernet1/0/1] port link-type trunk [DeviceB-GigabitEthernet1/0/1] port trunk permit vlan 1 to 30 [DeviceB-GigabitEthernet1/0/1] smart-link flush enable [DeviceB-GigabitEthernet1/0/1] quit # Configure GigabitEthernet 1/0/2 as a trunk port, assign it to VLANs 1 through 30, disable the spanning tree feature, and enable flush message receiving on it. [DeviceB] interface gigabitethernet 1/0/2 [DeviceB-GigabitEthernet1/0/2] port link-type trunk [DeviceB-GigabitEthernet1/0/2] port trunk permit vlan 1 to 30 [DeviceB-GigabitEthernet1/0/2] undo stp enable [DeviceB-GigabitEthernet1/0/2] smart-link flush enable [DeviceB-GigabitEthernet1/0/2] quit # Create monitor link group 1, and then configure GigabitEthernet 1/0/1 as an uplink port and GigabitEthernet 1/0/2 as a downlink port for monitor link group 1. [DeviceB] monitor-link group 1 [DeviceB-mtlk-group1] port gigabitethernet 1/0/1 uplink [DeviceB-mtlk-group1] port gigabitethernet 1/0/2 downlink [DeviceB-mtlk-group1] quit 4. Configure Device D: # Create VLANs 1 through 30. system-view [DeviceD] vlan 1 to 30 110