HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Configur - Page 107
the spanning tree feature and enable flush message receiving on it, and con VLAN 10 as
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
[DeviceB] interface gigabitethernet 1/0/3 [DeviceB-GigabitEthernet1/0/3] port link-type trunk [DeviceB-GigabitEthernet1/0/3] port trunk permit vlan 1 to 30 [DeviceB-GigabitEthernet1/0/3] undo stp enable [DeviceB-GigabitEthernet1/0/3] smart-link flush enable control-vlan 10 [DeviceB-GigabitEthernet1/0/3] quit 4. Configure Device E: # Create VLANs 1 through 30. system-view [DeviceE] vlan 1 to 30 # Configure GigabitEthernet 1/0/1 as a trunk port, and assign it to VLANs 1 through 30. Enable flush message receiving on it, and configure VLAN 10 and VLAN 20 as the receive control VLANs. [DeviceE] interface gigabitethernet 1/0/1 [DeviceE-GigabitEthernet1/0/1] port link-type trunk [DeviceE-GigabitEthernet1/0/1] port trunk permit vlan 1 to 30 [DeviceE-GigabitEthernet1/0/1] smart-link flush enable control-vlan 10 20 [DeviceE-GigabitEthernet1/0/1] quit # Configure GigabitEthernet 1/0/2 as a trunk port, and assign it to VLANs 1 through 30. Disable the spanning tree feature and enable flush message receiving on it, and configure VLAN 10 as the receive control VLAN. [DeviceE] interface gigabitethernet 1/0/2 [DeviceE-GigabitEthernet1/0/2] port link-type trunk [DeviceE-GigabitEthernet1/0/2] port trunk permit vlan 1 to 30 [DeviceE-GigabitEthernet1/0/2] undo stp enable [DeviceE-GigabitEthernet1/0/2] smart-link flush enable control-vlan 10 [DeviceE-GigabitEthernet1/0/2] quit # Configure GigabitEthernet 1/0/3 as a trunk port, and assign it to VLANs 1 through 30. Disable the spanning tree feature and enable flush message receiving on it, and configure VLAN 20 as the receive control VLAN. [DeviceE] interface gigabitethernet 1/0/3 [DeviceE-GigabitEthernet1/0/3] port link-type trunk [DeviceE-GigabitEthernet1/0/3] port trunk permit vlan 1 to 30 [DeviceE-GigabitEthernet1/0/3] undo stp enable [DeviceE-GigabitEthernet1/0/3] smart-link flush enable control-vlan 20 [DeviceE-GigabitEthernet1/0/3] quit 5. Configure Device A: # Create VLANs 1 through 30. system-view [DeviceA] vlan 1 to 30 # Configure GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 as trunk ports, and assign them to VLANs 1 through 30. Enable flush message receiving on them, and configure VLAN 10 and VLAN 20 as the receive control VLANs. [DeviceA] interface gigabitethernet 1/0/1 [DeviceA-GigabitEthernet1/0/1] port link-type trunk [DeviceA-GigabitEthernet1/0/1] port trunk permit vlan 1 to 30 [DeviceA-GigabitEthernet1/0/1] smart-link flush enable control-vlan 10 20 [DeviceA-GigabitEthernet1/0/1] quit 100