HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Configur - Page 111
the receive control VLANs on GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2.
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
# Create VLAN 1 through VLAN 200. system-view [DeviceD] vlan 1 to 200 # Configure GigabitEthernet 1/0/1 as a trunk port and assign it to VLANs 1 through 200. Enable flush message receiving and configure VLAN 10 and VLAN 110 as the receive control VLANs on GigabitEthernet 1/0/1. [DeviceD] interface gigabitethernet 1/0/1 [DeviceD-GigabitEthernet1/0/1] port link-type trunk [DeviceD-GigabitEthernet1/0/1] port trunk permit vlan 1 to 200 [DeviceD-GigabitEthernet1/0/1] smart-link flush enable control-vlan 10 110 [DeviceD-GigabitEthernet1/0/1] quit # Configure GigabitEthernet 1/0/2 as a trunk port and assign it to VLANs 1 through 200. Disable the spanning tree feature and enable flush message receiving on it, and configure VLAN 10 and VLAN 110 as the receive control VLANs. [DeviceD] interface gigabitethernet 1/0/2 [DeviceD-GigabitEthernet1/0/2] port link-type trunk [DeviceD-GigabitEthernet1/0/2] port trunk permit vlan 1 to 200 [DeviceD-GigabitEthernet1/0/2] undo stp enable [DeviceD-GigabitEthernet1/0/2] smart-link flush enable control-vlan 10 110 [DeviceD-GigabitEthernet1/0/2] quit 4. Configure Device A: # Create VLAN 1 through VLAN 200. system-view [DeviceA] vlan 1 to 200 # Configure GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 as trunk ports and assign them to VLANs 1 through 200. Enable flush message receiving and configure VLAN 10 and VLAN 110 as the receive control VLANs on GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2. [DeviceA] interface gigabitethernet 1/0/1 [DeviceA-GigabitEthernet1/0/1] port link-type trunk [DeviceA-GigabitEthernet1/0/1] port trunk permit vlan 1 to 200 [DeviceA-GigabitEthernet1/0/1] smart-link flush enable control-vlan 10 110 [DeviceA-GigabitEthernet1/0/1] quit [DeviceA] interface gigabitethernet 1/0/2 [DeviceA-GigabitEthernet1/0/2] port link-type trunk [DeviceA-GigabitEthernet1/0/2] port trunk permit vlan 1 to 200 [DeviceA-GigabitEthernet1/0/2] smart-link flush enable control-vlan 10 110 [DeviceA-GigabitEthernet1/0/2] quit 5. Verify the configuration: You can use the display smart-link group command to display the smart link group configuration on a device. # Display the smart link group configuration on Device C. [DeviceC] display smart-link group all Smart link group 1 information: Device ID: 000f-e23d-5af0 Preemption delay: 1(s) Preemption mode: ROLE Control VLAN: 10 104