HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Configur - Page 82
Con Device D
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
[DeviceC-GigabitEthernet1/0/2] port link-type trunk [DeviceC-GigabitEthernet1/0/2] port trunk permit vlan 1 to 30 [DeviceC-GigabitEthernet1/0/2] quit [DeviceC] interface gigabitethernet 1/0/3 [DeviceC-GigabitEthernet1/0/3] undo link-delay [DeviceC-GigabitEthernet1/0/3] undo stp enable [DeviceC-GigabitEthernet1/0/3] qos trust dot1p [DeviceC-GigabitEthernet1/0/3] port link-type trunk [DeviceC-GigabitEthernet1/0/3] port trunk permit vlan 1 to 30 [DeviceC-GigabitEthernet1/0/3] quit [DeviceC] interface gigabitethernet 1/0/4 [DeviceC-GigabitEthernet1/0/4] undo link-delay [DeviceC-GigabitEthernet1/0/4] undo stp enable [DeviceC-GigabitEthernet1/0/4] qos trust dot1p [DeviceC-GigabitEthernet1/0/4] port link-type trunk [DeviceC-GigabitEthernet1/0/4] port trunk permit vlan 1 to 30 [DeviceC-GigabitEthernet1/0/4] quit # Create RRPP domain 1. Configure VLAN 4092 as the primary control VLAN of RRPP domain 1, and configure the VLANs mapped to MSTI 1 as the protected VLANs of RRPP domain 1. [DeviceC] rrpp domain 1 [DeviceC-rrpp-domain1] control-vlan 4092 [DeviceC-rrpp-domain1] protected-vlan reference-instance 1 # Configure Device C as the transit node of primary ring 1, with GigabitEthernet 1/0/1 as the primary port and GigabitEthernet 1/0/2 as the secondary port, and enable ring 1. [DeviceC-rrpp-domain1] ring 1 node-mode transit primary-port gigabitethernet 1/0/1 secondary-port gigabitethernet 1/0/2 level 0 [DeviceC-rrpp-domain1] ring 1 enable # Configure Device C as the assistant-edge node of subring 4, with GigabitEthernet 1/0/3 as the edge port, and enable subring 4. [DeviceC-rrpp-domain1] ring 4 node-mode assistant-edge edge-port gigabitethernet 1/0/3 [DeviceC-rrpp-domain1] ring 4 enable # Configure Device C as the assistant-edge node of subring 5, with GigabitEthernet 1/0/4 as the edge port, and enable subring 5. [DeviceC-rrpp-domain1] ring 5 node-mode assistant-edge edge-port gigabitethernet 1/0/4 [DeviceC-rrpp-domain1] ring 5 enable [DeviceC-rrpp-domain1] quit # Enable RRPP. [DeviceC] rrpp enable 4. Configure Device D: # Create VLANs 1 through 30, map these VLANs to MSTI 1, and activate the MST region configuration. system-view [DeviceD] vlan 1 to 30 [DeviceD] stp region-configuration [DeviceD-mst-region] instance 1 vlan 1 to 30 [DeviceD-mst-region] active region-configuration 75