Dell Powerconnect W-ClearPass Hardware Appliances W-ClearPass Policy Manager 6 - Page 282
Import SNMP Trap Server, Table 161,
View all Dell Powerconnect W-ClearPass Hardware Appliances manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 282 highlights
Table 161: Add SNMP Trap Server fields Container Description Host Address Trap destination hostname or ip address. NOTE: This server must have an SNMP trap receiver or trap viewer installed. Description Freeform description. SNMP Version V1 or V2C. Community String /Verify Community String Community string for sending the traps. Server Port Port number for sending the traps; by default, port 162. NOTE: Configure the trap server firewall for traffic on this port. Save/Cancel Click Save to commit the configuration or Cancel to dismiss. Import SNMP Trap Server To import a trap server, navigate to Administration > External Servers > SNMP Trap Receivers and select the Import SNMP Trap Server link. Figure 253: Fig: Import SNMP Trap Server Table 162: Import SNMP Trap Server Container Description Select File Browse to the SNMP Trap Server configuration file to be imported. Enter secret for the file (if any) If the file was exported with a secret key for encryption, enter the same key here. Import/Cancel Click Import to commit, or Cancel to dismiss the popup. Export all SNMP Trap Servers To export all SNMP trap servers, navigate to Administration > External Servers > SNMP Trap Receivers and select the Export SNMP Trap Server link. This link exports all configured SNMP Trap Receivers. Click Export Trap 282 Dell Networking W-ClearPass Policy Manager 6.0 | User Guide