Dell Powerconnect W-ClearPass Hardware Appliances W-ClearPass Policy Manager 6 - Page 35

Tab Container Description Authentication Type Identifies the authentication type used for the access. Authentication Service Identifies the authentication service used for the access. Auth Sessions Number of Authentication Sessions Total number of authentications (always 1) and authorizations in this session Authentication Session Details For each request ID, denotes whether it is an authentication or authorization request, and the time at which the request was sent Details For each authorization request, shows: cmd (command typed), priv-lvl (privilege level of the administrator executing the command), service (shell), etc. OnGuard Activity The OnGuard Activity screen shows the realtime status of all endpoints that have Dell OnGuard persistent or dissolvable agent, at: Monitoring > Live Monitoring >OnGuard Activity. This screen also presents configuration tools to bounce an endpoint and to send unicast or broadcast messages to all endpoints running the OnGuard agent. Note that bouncing of endpoints will only work with endpoints running the persistent agent. Figure 11: Fig: OnGuard Activity Table 10: OnGuard Activity Container Auto Refresh Bounce Client (using SNMP) Description Toggle auto-refresh. If this is turned on, all endpoint activities are refreshed automatically. Given the MAC or IP address of the endpoint, perform a bounce operation (via SNMP) on the switch port to which the endpoint is connected. This feature only works with wired Ethernet switches. Note that, for this operation to work: l The network device must be added to Policy Dell Networking W-ClearPass Policy Manager 6.0 | User Guide 35