IBM 6000R Hardware Maintenance Manual - Page 158
Four-fan housing, Before you begin
UPC - 087944534341
View all IBM 6000R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Four-fan housing Before you begin: • Read "Safety information" on page 196. • Review the information in "Before you begin" on page 63. 1 Release latches 2 Fan housing To remove the four-fan housing, do the following: 1. Power-off the server, if it is on. 2. Unplug the server. 3. Remove the top cover (see "Removing the server top cover and bezel" on page 67). 4. Remove the four fan assemblies. 5. Remove all adapters from the Active PCI adapter slots. 6. Remove the plastic dividers between the PCI adapter slots. 7. Press the fan assembly release latches on both sides of the fan assembly; then, remove the fan assembly from the server. 146 Netfinity 6000R Type 8682 Models 1RY, 2RY
146
Netfinity 6000R Type 8682 Models 1RY, 2RY
Four-fan housing
Before you begin:
•
Read “Safety information” on page 196.
•
Review the information in “Before you begin” on page
63.
±
1
²
Release latches
±
2
²
Fan housing
To remove the four-fan housing, do the following:
1.
Power-off the server, if it is on.
2.
Unplug the server.
3.
Remove the top cover (see “Removing the server top
cover and bezel” on page 67).
4.
Remove the four fan assemblies.
5.
Remove all adapters from the Active PCI adapter slots.
6.
Remove the plastic dividers between the PCI adapter
slots.
7.
Press the fan assembly release latches on both sides
of the fan assembly; then, remove the fan assembly
from the server.