IBM 6000R Hardware Maintenance Manual - Page 50
UNIX messages, The primary Ethernet
UPC - 087944534341
View all IBM 6000R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Table 5. NDIS (Windows NT) driver messages for the Ethernet controller PermaNet Server: Problem Occurs on the Primary Adapter. Switching over to the Secondary Adapter. PermaNet Server: Explanation: The system detected a problem with the primary Ethernet connection and has transferred all network traffic to the secondary Ethernet controller. Action: identify the cause of the failure on the primary Ethernet connection. Restoring the operational state of the primary connection will cause the network traffic to automatically transfer to the primary Ethernet controller. Switching back to Primary Adapter. Explanation: The primary Ethernet connection is now operating correctly. Network traffic will automatically transfer to the primary Ethernet controller. Action: None needed, message is for information only. UNIX messages This section provides descriptions of the Ethernet error messages for the SCO UNIX LLI driver, and suggested actions to resolve each problem. Table 6. UNIX LLI driver messages for the Ethernet controller pnt0-2 PCI search specified, PCI device not found! Explanation: The driver cannot locate the Ethernet controller on the PCI bus. Action: • Run the NETCONFIG program to search for another Ethernet controller • Verify that the Ethernet controller is enabled. If the Ethernet controller is enabled, run the diagnostic programs. 38 Netfinity 6000R Type 8682 Models 1RY, 2RY