IBM 6000R Hardware Maintenance Manual - Page 47
Network driver interface specification 2.01 (OS/2) driver messages, PROTOCOL.INI file.
UPC - 087944534341
View all IBM 6000R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Table 3. Novell NetWare or IntraNetWare ODI driver messages for the Ethernet controller PCNTNWNW-180 The DMA parameter is not necessary for PCI device. Explanation: The Ethernet controller does not require a DMA setting. Action: None necessary, message is for information only. Network driver interface specification 2.01 (OS/2) driver messages This section provides explanations of the error messages for the NDIS 2.01 (OS/2) drivers, and suggested actions to resolve each problem. Table 4. NDIS 2.01 (OS/2) driver messages for the Ethernet controller PCNTND-1 Unable to open the Protocol Manager. PCNTND-6 Explanation: The NDIS stack is not configured correctly. Action: Check and correct the configuration. Out of memory while allocating buffers. PCNTND-7 Explanation: The driver could not allocate the requested buffers. Action: Check the system configuration. Edit the PROTOCOL.INI file to reduce the number of Txbuffers and Rxbuffers specified for the driver. A Protocol Manager device error occurred. PCNTND-8 Explanation: The NDIS stack is not configured correctly. Action: Check and correct the configuration. Bad status for the Protocol Manager. PCNTND-9 Explanation: The NDIS stack is not configured correctly in the PROTOCOL.INI file. Action: Check and correct the configuration. Cannot find the PROTOCOL.INI entry. Explanation: The NDIS stack is not configured correctly in the PROTOCOL.INI file. Action: Check and correct the configuration. Diagnostics 35