IBM 6000R Hardware Maintenance Manual - Page 188
System Board, Verify a bootable operating, system is installed., Video Adapter if installed, Error
UPC - 087944534341
View all IBM 6000R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
Error Code/Symptom 1601 (The system is able to communicate to the Service Processor, but the Service Processor failed to respond at the start of POST.) Do the following before replacing a FRU: 1. Remove the ac power to the system, wait 20 seconds; then, re-connect the ac power. Wait 30 seconds; then, power-on the system. 2. Flash update the Service Processor. 1800 (No more hardware interrupt available for PCI adapter) 1962 (Drive does not contain a valid boot sector) 2400 (Video controller test failure) 2462 (Video memory configuration error) FRU/Action 1. System Board 2. Service Processor Board 1. Run Configuration/Setup 2. Failing Adapter 3. System Board 1. Verify a bootable operating system is installed. 2. If RAID system, refer to the Hardware Maintenance Manual for the specific RAID adapter. 3. Run Diagnostics 4. Hard Disk Drive 5. Cable 6. SCSI Backplane 7. System Board 1. Video Adapter (if installed) 2. System Board 1. Video Adapter (if installed) 2. System Board 176 Netfinity 6000R Type 8682 Models 1RY, 2RY