IBM 6000R Hardware Maintenance Manual - Page 159
Dual fan mount assembly with cable
UPC - 087944534341
View all IBM 6000R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Dual fan mount assembly with cable Before you begin: • Read "Safety information" on page 196. • Review the information in "Before you begin" on page 63. Note: To remove the fan housing assembly with card guides (for four fans), see step 4 on page 72. 88 1 Holding screws 2 Dual fan mount assembly To remove the dual fan mount assembly with cable, do the following: 1. Power-off the server, if it is on. 2. Unplug the server. 3. Remove the top cover (see "Removing the server top cover and bezel" on page 67). 4. Disconnect the dual fan mount cable. 5. Remove the two holding screws. 6. Gently lift the fan mount assembly out of the server. FRU information (service only) 147
FRU information (service only)
147
Dual fan mount assembly with cable
Before you begin:
•
Read “Safety information” on page 196.
•
Review the information in “Before you begin” on page
63.
Note:
To remove the fan housing assembly with card guides
(for four fans), see step 4 on page 72.
±
1
²
Holding screws
±
2
²
Dual fan mount assembly
To remove the dual fan mount assembly with cable, do the
following:
1.
Power-off the server, if it is on.
2.
Unplug the server.
3.
Remove the top cover (see “Removing the server top
cover and bezel” on page 67).
4.
Disconnect the dual fan mount cable.
5.
Remove the two holding screws.
6.
Gently lift the fan mount assembly out of the server.
88