Yamaha QY700 Owner's Manual - Page 206
Click beat, click mode, and count, Data display, Track number, Measure
View all Yamaha QY700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
0101 1101 Tempo Meter 25.0,...,300.0 (= ) 1/16,...,16/16; 1/8,...,16/8; 1/4,...,8/4 1. Press d [D2] as necessary to move the cursor to the tempo or meter setting. 2. Set the value using the data dial, n/y, or the numeric keypad. 8. Click beat, click mode, and count 1. PATCH 9. Data display • This area shows the name of the currently selected phrase, or the value of the currently selected scale-time or beatshift setting. 10. Track number 11. Measure • These parameters set up the sequencer's click sound. • The beat value sets the click interval. • The mode setting determines when the click feature is used. • The count value sets the number of preliminary measures used as a lead-in for realtime recording. 0101 1101 Click mode: Off Disables the click feature. Rec Use click for realtime and punch recording only. Ply Use click for realtime recording, punch recording, and playback. All Always use click. Click beat , ,,, Count Off, 1,...,8Ms 1. Press d [D4] as necessary to move the cursor to the appropriate click parameter. 2. Set the value using the data dial or n/y. (For the click beat, you can also set the value by pressing the appropriate note key on the numeric keypad.) • The lower half of the PATCH screen presents a matrix showing the pattern's phrase arrangement, with the track numbers running down the left side and the measure numbers running across the top. • The track numbers run from 1 to 16. The measure numbers run from M001 (measure 1) to the final measure in the pattern. The entire arrangement cannot fit on the screen, but you can scroll in any direction as required. 5 • You can edit the pattern by entering any phrase, or a rest value, at any location on the matrix. 0101 1101 Track Measure 1,...,16 M001,...,pattern length (where pattern length is set by the second value in the [D1] entry area; see page 204.) • Move to the appropriate matrix position using u/d, and/or the cursor keys. Chapter 5. PATTERN MODE 205