Yamaha QY700 Owner's Manual - Page 79
Loop switch; locations 1 and 2, Tempo and meter, Click mode, click beat, and count
View all Yamaha QY700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
1. SONG PLAY 10. Loop switch; locations 1 and 2 • Set the loop feature ON when you want to repeatedly play a specific area of the selected song. • When loop play is in effect, locations 1 and 2 set the start and end points of the loop (by measure number). Even when loop play is not in effect, you can jump to location 1 or 2 at any time by pressing 1 or 2, respectively. 0101 1101 Loop on LOOP Loop off OFF Locations 1/2 001,...,999 1. Press d [D2] as necessary to move the cursor to the loop-switch area or either of the location values. 2. Switch the value using the data dial or n/y . • To set location 1 or 2 equal to the value of the current measure, hold down s and press 1 or 2. 11. Tempo and meter • The tempo value sets the tempo for recording or playback of the song. • Each song stores its own tempo value. • The meter setting area shows the meter for the current meas- ure. 0101 1101 Tempo Meter 25.0,...,300.0 (= ) View only 1. Press d [D3] to move the cursor to the tempo area. 2. Set the appropriate value using the data dial, n/y, or the numeric keypad. • The meter values are set in Song Recording. (→ p.111) 12. Click mode, click beat, and count • These parameters set up the sequencer's click sound. • The beat value sets the click interval. • The mode setting determines when the click feature is used. • The count value sets the number of preliminary measures used at start of realtime recording. 0101 1101 Click mode: Off Disables the click feature. Rec Use click for realtime and punch recording only. Ply Use click for realtime recording, punch recording, and playback. All Always use click. Click beat: , ,,, Count: Off, 1,...,8Ms 1. Press d [D4] as necessary to move the cursor to the appropriate click parameter. 2. Set the value using the data dial or n/y. 78 Chapter 2. SONG MODE