Yamaha QY700 Owner's Manual - Page 86

• Press u or d until the track number for the desired track is highlighted. • Note that the screen only shows tracks 1 to 16 or tracks 17 to 32. You can toggle between these two groupings by pressing 6. 2. Measure and beat • The measure value sets the start point for song playback. • The measure and beat values increase during playback, in- dicating the current song location. 0101 1101 Measure: 001,...,999 1. Press d [D1] to move the cursor to the measure display area. 2. Set the measure value using the data dial, n/y, or the numeric keypad → e. • You can change the measure value while song playback is in progress. Playback will immediately jump to the new location. • There are three ways to change the measure during playback, as follows. • Press d [D1] to move the cursor to the measure display area, and then change the value as described above. • Rotate the shuttle dial, or press r or f. • Press t to return to the top of the song (measure 001, beat 1). • When you select a new song, the measure value automatically switches to 001. 3. Voice program 2. Play Effects 2 • The icons indicate the voice program assigned to each track. • You select the voices using VOICE mode. (→ p.168) 4. Play-effects THRU setting • You use this setting to determine whether or not to apply the play effects to the corresponding track. If you set the value to , the QY700 will play the track without using the play effects. • The QY700 memorizes the THRU settings separately for each song 0101 1101 Apply play effects to the track. Do not apply play effects to the track. 1. Move the cursor to the P.FX.THRU line for the track you want to set. 2. Change the setting using the data dial or the n or y key. Chapter 2. SONG MODE 85