D-Link DGS-1510 User Manual - Page 101

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide After clicking the c: hyperlink, the following window will appear: Figure 4-71 File System - Search for Drive Window Click the Previous button to return to the previous window. Click the Create Directory button to create a new directory within the file system of the Switch. Click the Copy button to copy a specific file to the Switch. Click the Boot Up button to set a specific runtime image as the boot up image. Click the Rename button to rename a specific file's name. Click the Delete button to remove a specific file from the file system. Click the Copy button to see the following window. Figure 4-72 File System - Copy Window When copying a file to the file system of this switch, the user must enter the Source and Destination path. Tick the Replace check box to replace the current running configuration with the indicated configuration file. Click the Apply button to initiate the copy. Click the Cancel button the discard the process. Physical Stacking The Switch supports switch stacking, where a set of six switches can be combined and managed by one IP address through Telnet, the Web UI, the RJ45 console port, or through SNMP. Each switch of this series has two stacking ports located at the front of the device, which can be used to connect other devices and make them stack together. After adding these stacking ports, the user may connect 90