D-Link DGS-1510 User Manual - Page 56

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide SNMP Group Table Settings An SNMP Group created with this table maps SNMP users (identified in the SNMP User Table) to the views created in the previous window. To view the following window, click Management > SNMP > SNMP Group Table Settings, as shown below: Figure 4-10 SNMP Group Table Settings Window The fields that can be configured are described below: Parameter Group Name User-based Security Model Security Level IP Access-List Name Read View Name Write View Name Notify View Name Description Enter the group name of a maximum of 32 characters. The syntax is general string that does not allow space. Select the security model here. Options to choose from are: • SNMPv1 - Select to allow the group user to use the SNMPv1 security model. • SNMPv2c - Select to allow the group user to use the SNMPv2c security model. • SNMPv3 - Select to allow the group user to use the SNMPv3 security model. When selecting SNMPv3 in the User-based Security Model dropdown list, this option is available. • NoAuthNoPriv - Specify that there will be no authorization and no encryption of packets sent between the Switch and a remote SNMP manager. • AuthNoPriv - Specify that authorization will be required, but there will be no encryption of packets sent between the Switch and a remote SNMP manager. • AuthPriv - Specify that authorization will be required, and that packets sent between the Switch and a remote SNMP manger will be encrypted. Enter the standard IP access control list (ACL) to associate with the group. Enter the read view name that the group user can access. Enter the write view name that the group user can access. Enter a write view name that the group user can access. The notify view describes the object that can be reported its status via trap packets to the group user. Click the Add button to add a new entry based on the information entered. 45