D-Link DGS-1510 User Manual - Page 350

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter Max Users Periodic ReAuth Timer Inactivity State Inactivity Timer Restart Description • Any - Specifies that if any of the authentication method (802.1X, MAC-based Access Control, WAC, or JWAC) to passes, then passes. • MAC-JWAC - Specifies to verify MAC-based authentication first. If the client passes, JWAC will be verified next. Both authentication methods need to be passed. • MAC-WAC - Specifies to verify MAC-based authentication first. If the client passes, WAC will be verified next. Both authentication methods need to be passed. Enter the maximum users value used here. This value must be between 1 and 1000. Select to enable or disable periodic re-authentication for the selected port here. This parameter only affects the 802.1X protocol. Enter the re-authentication timer value here. This value must be between 1 and 65535 seconds. By default, this value is 3600 seconds. Select to enable or disable the inactivity state here. When the Inactivity State is enabled, enter the inactivity timer value here. This value must be between 120 and 65535 seconds. This parameter only affects the WAC and JWAC authentication protocols. Enter the restart time value used here. This value must be between 1 and 65535 seconds. Click the Apply button to accept the changes made. Network Access Authentication Sessions Information This window is used to view and clear the network access authentication session information. To view the following window, click Security > Network Access Authentication > Network Access Authentication Sessions Information, as shown below: Figure 9-78 Network Access Authentication Sessions Information Window The fields that can be configured are described below: Parameter Port MAC Address Description Select the appropriate switch unit and port used for the query here. Enter the MAC address used here. 339