D-Link DGS-1510 User Manual - Page 128
From Port / To Port, Allowed VLAN Range
![]() |
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter Acceptable Frame Ingress Checking Native VLAN VID Action Add Mode Allowed VLAN Range Clone Unit From Port / To Port Description Select the acceptable frame behavior option here. Options to choose from are Tagged Only, Untagged Only, and Admit All. Select the check box to enable or disable the ingress checking function. Tick this option to enable the native VLAN function. After ticking the Native VLAN check box, this option will be available. Enter the VLAN ID used for this configuration here. This value must be between 1 and 4094. Select the action that will be taken here. Options to choose from are Add, Remove, Tagged, and Untagged. Select whether to add an Untagged or Tagged parameters. Enter the allowed VLAN range information here. Tick this option to apply the configuration to the specified ports. Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. When Trunk was selected as the VLAN Mode, the following page will appear. Figure 5-18 Configure VLAN Interface - Trunk Window The fields that can be configured are described below: Parameter VLAN Mode Acceptable Frame Ingress Checking Native VLAN VID Description Select the VLAN mode option here. Options to choose from are Access, Hybrid, and Trunk. Select the acceptable frame behavior option here. Options to choose from are Tagged Only, Untagged Only, and Admit All. After selecting Trunk as the VLAN Mode the following parameter will be available. Select to enable or disable the ingress checking function. Tick the check box to enable the native VLAN function. Select if this VLAN supports Untagged or Tagged frames. After ticking the Native VLAN check box, this option will be available. Enter the VLAN ID used for this configuration here. This value must be between 1 and 4094. 117
![](/manual_guide/products/dlink-dgs1510-user-manual-acdf2fb/128.png)