D-Link DGS-1510 User Manual - Page 389
Firmware Upgrade from TFTP, Firmware Backup to HTTP, Source File, Browse, Destination File, Upgrade
![]() |
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 389 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Unit Source File Destination File Description Select the switch unit that will be used for this configuration here. Enter the source filename and path of the firmware file located on the local PC. This field can be up to 64 characters long. Alternatively click the Browse button to navigate to the location of the firmware file located on the local PC. Enter the destination filename and path where the new firmware should be stored on the Switch. This field can be up to 64 characters long. Click the Upgrade button to initiate the firmware upgrade. Firmware Upgrade from TFTP This window is used to initiate a firmware upgrade from a TFTP server. To view the following window, click Tools > Firmware Upgrade & Backup > firmware Upgrade from TFTP, as shown below: Figure 13-3 Firmware Upgrade from TFTP Window The fields that can be configured are described below: Parameter Unit TFTP Server IP Source File Destination File Description Select the switch unit that will be used for this configuration here. Enter the TFTP server's IP address here. When the IPv4 option is selected, enter the IPv4 address of the TFTP server in the space provided. When the IPv6 option is selected, enter the IPv6 address of the TFTP server in the space provided. Enter the source filename and path of the firmware file located on the TFTP server here. This field can be up to 64 characters long. Enter the destination filename and path where the new firmware should be stored on the Switch. This field can be up to 64 characters long. Click the Upgrade button to initiate the firmware upgrade. Firmware Backup to HTTP This window is used to initiate a firmware backup to a local PC using HTTP. NOTE: The Source File (name and path) can be found in the File System window on page 89. 378
![](/manual_guide/products/dlink-dgs1510-user-manual-acdf2fb/389.png)