D-Link DGS-1510 User Manual - Page 347

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. Network Access Authentication Global Settings This window is used to view and configure the network access authentication global settings. To view the following window, click Security > Network Access Authentication > Network Access Authentication Global Settings, as shown below: Figure 9-76 Network Access Authentication Global Settings Window The fields that can be configured for Network Access Authentication MAC Format Settings are described below: Parameter Case Delimiter Delimiter Number Description Select the case format that will be used for the network access authentication MAC address here. Options to choose from are Lowercase and Uppercase. Select the delimiter that will be used for the network access authentication MAC address here. Options to choose from are Hyphen, Colon, Dot, and None. Select the delimiter number option here. Options to choose from are 1, 2, and 5. Click the Apply button to accept the changes made. The fields that can be configured for General Settings are described below: Parameter Max Users Deny MAC-Move Description Enter the maximum amount of users allowed here. This value must be between 1 and 1000. By default, this option is 1000. Select to enable or disable the deny MAC-move feature here. This option controls whether to allow authenticated hosts to do roaming across different switch ports and only controls whether a host, which is authenticated at a port set to the multi-authenticate mode is allowed to move to another port. 336