D-Link DGS-1510 User Manual - Page 404

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide The fields that can be configured are described below: Parameter PoE Description Select the maximum power that will be supplied on the PoE port. Options to choose from are Auto, 4W, 7W, 15.4W, 30W, and a configurable value from 1000 mW to 30000 mW. The unit is either in watt or milliwatt. Click the Apply button to accept the changes made. Click the Cancel button to discard the changes made. After hovering (with the mouse pointer) over the network device icon, the following additional information will be displayed: Figure 14-3 Additional Device Information After clicking (left-click) the network device icon, the following window will appear. Figure 14-4 PD Alive Configuration Window The fields that can be configured are described below: Parameter PD Alive State PD IP Address Action Description Select to enable or disable the PD Alive function here. Enter the IP address of the PD here. Select the action that will be taken here. Options to choose from are: • Reset - Specifies to reset the PoE port state (turn PoE off and on). • Notify - Specifies to send logs and traps to notify the administrator. • Both - Specifies to send logs and traps to notify the administrator and to reset the PoE port state (turn PoE off and on). Click the Ping Test button to initiate the ping test to check if the PD is active or not. Click the Apply button to accept the changes made. Click the Set to Default button to return the settings to the default settings for this PD. 393