D-Link DGS-1510 User Manual - Page 421

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter Tx/Rx CRC Counter Discovered Surveillance Devices Detect Distance Description Overload, Power Denied, Thermal Shutdown, Startup Failure, or Classification Failure. This field displays the TX/RX CRC counter. This field displays the number of ONVIF IP cameras and NVRs discovered on the port. Click the hyperlink (1) to view the group details associated with IP camera or NVR connected to the port. For more information, refer to Group Details on page 397. Click the Detect button to initiate a cable distance test on the specified port. Click the Detect All button to initiate a cable distance test on all the ports of the Switch. Toolbar Wizard Click this option to start the Smart Wizard. For more information about the Smart Wizard, refer to Smart Wizard on page 4. Tools Firmware Upgrade & Backup Firmware Upgrade from HTTP This window is used to initiate a firmware upgrade from a local PC using HTTP. To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Upgrade from HTTP, as shown below: Figure 14-22 Firmware Upgrade from HTTP Window The fields that can be configured are described below: Parameter Unit Source File Destination File Description Select the switch unit that will be used for this configuration here. Enter the source filename and path of the firmware file located on the local PC. This field can be up to 64 characters long. Alternatively click the Browse button to navigate to the location of the firmware file located on the local PC. Enter the destination filename and path where the new firmware should be stored on the Switch. This field can be up to 64 characters long. Click the Upgrade button to initiate the firmware upgrade. 410