D-Link DGS-1510 User Manual - Page 166

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter Exp (sec) Description • EX (Exclude) - The filter mode is Exclude. Display the time left in seconds before the entry expires. Click the Find button to locate a specific entry based on the information entered. Click the Find All button to view all the entries. IGMP Snooping Mrouter Settings This window is used to configure the specified interface(s) as the multicast router ports or as forbidden to be multicast router ports on the Switch. To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Mrouter Settings, as shown below: Figure 5-63 IGMP Snooping Mrouter Settings Window The fields that can be configured for IGMP Snooping Mrouter Settings are described below: Parameter VID Configuration Unit From Port / To Port Description Enter a VLAN ID between 1 and 4094. Select the port configuration. Options to choose from are: • Port - Select to have the configured ports to be static multicast router ports. • Forbidden Port - Select to have the configured ports not to be multicast router ports. Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. The fields that can be configured for IGMP Snooping Mrouter Table are described below: Parameter VID Description Enter a VLAN ID between 1 and 4094. Click the Find button to locate a specific entry based on the information entered. Click the Find All button to view all the entries. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 155