D-Link DGS-1510 User Manual - Page 121
MAC Notification, L2 Features > FDB > MAC Notification
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide MAC Notification This window is used to view and configure MAC notification. To view the following window, click L2 Features > FDB > MAC Notification, as shown below: Figure 5-6 MAC Notification (MAC Notification Settings) Window The fields that can be configured are described below: Parameter MAC Address Notification Interval History Size MAC Notification Trap State Unit From Port / To Port Added Trap Removed Trap Description Select to enable or disable MAC notification globally on the Switch. Enter the time value between notifications. This value must be between 1 and 2147483647 seconds. By default, this value is 1 second. Enter the maximum number of entries listed in the history log used for notification. This value must be between 0 and 500. By default, this value is 1. Select this option to enable or disable the MAC notification trap state. Select the switch unit that will be used for this configuration here. Select the range of ports that will be used for this configuration here. Select this option to enable or disable the added trap for the port(s) selected. Select this option to enable or disable the removed trap for the port(s) selected. Click the Apply button to accept the changes made for each individual section. 110