D-Link DGS-1510 User Manual - Page 393
Configuration Backup to TFTP, Log Backup, Log Backup to HTTP
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 393 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Configuration Backup to TFTP This window is used to initiate a configuration file backup to a TFTP server. To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to TFTP, as shown below: Figure 13-9 Configuration Backup to TFTP Window The fields that can be configured are described below: Parameter Unit TFTP Server IP Source File Destination File Description Select the switch unit that will be used for this configuration here. Enter the TFTP server's IP address here. When the IPv4 option is selected, enter the IPv4 address of the TFTP server in the space provided. When the IPv6 option is selected, enter the IPv6 address of the TFTP server in the space provided. Enter the source filename and path of the configuration file located on the switch here. This field can be up to 64 characters long. Select the running-config option to back up the running configuration file from the Switch. Select the startup-config option to back up the start-up configuration file from the Switch. Enter the destination filename and path where the configuration file should be stored on the TFTP server. This field can be up to 64 characters long. Click the Backup button to initiate the configuration file backup. Log Backup Log Backup to HTTP This window is used to initiate a system log backup to a local PC using HTTP. To view the following window, click Tools > Log Backup > Log Backup to HTTP, as shown below: Figure 13-10 Log Backup to HTTP Window 382