D-Link DGS-1510 User Manual - Page 269
Ethernet Type Mask, Specify Ethernet Type, VLAN Range, Time Range, Apply, Counter State, Remark
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 269 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter Ethernet Type Mask CoS VID VLAN Range Time Range Description Enter the Ethernet type mask hexadecimal value here. This value must be between 0x0 and 0xFFFF. When any Ethernet type profile is selected in the Specify Ethernet Type drop-down list, the appropriate hexadecimal value will automatically be entered. Select the CoS value used here. This value is between 0 and 7. Enter the VLAN ID that will be associated with this ACL rule here. This value must be between 1 and 4094. Enter the VLAN range here. Enter the minimum and maximum VLAN ID in the range here. Enter the name of the time range to associate with this ACL rule. Click the Back button to discard the changes made and return to the previous page. Click the Apply button to accept the changes made. To enable the Counter State option or to enter a Remark for the profile, click the Edit button, next to the specific ACL profile (found in the ACL profile table). Figure 8-55 Extended MAC ACL (Edit ACL) Window The fields that can be configured are described below: Parameter Start Sequence No. Stop Counter State Remark Description Enter the start sequence number here. Enter the stop sequence number here. Select to enable or disable the counter state option here. Enter an optional remark that will be associated with this profile here. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. 258