D-Link DGS-1510 User Manual - Page 238

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide The dynamic fields that can be configured are described below: Parameter Source Destination Specify ICMP Message Type ICMP Message Type Message Code DSCP Flow Label Time Range Action Description Select and enter the source information here. Options to choose from are: • Any - Any source traffic will be evaluated according to the conditions of this rule. • Host - Enter the source host's IPv6 address here. • IPv6 - The Prefix Length option will also be available. Enter the source IPv6 address and prefix length value in the spaces provided. Select and enter the destination information here. Options to choose from are: • Any - Any destination traffic will be evaluated according to the conditions of this rule. • Host - Enter the destination host's IPv6 address here. • IPv6 - The Prefix Length option will also be available. Enter the destination IPv6 address and prefix length value in the spaces provided. Select the ICMP message type used here. When the ICMP Message Type is selected, this numerical value will automatically be entered. When the ICMP Message Type is not selected, enter the ICMP Message Type numerical value used here. When the ICMP Message Type is selected, this numerical value will automatically be entered. When the ICMP Message Type is not selected, enter the Message Code numerical value used here. Select or enter the DSCP value used here. This value must be between 0 and 63. Enter the flow label value here. This value must be between 0 and 1048575. Enter the name of the time range to associate with this ACL rule. Select the action that this rule will take here. Options to choose from are Permit and Deny. 227