D-Link DGS-1510 User Manual - Page 131

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Global GVRP State Dynamic VLAN Creation Description Select this option to enable or disable the global GVRP state here. Select this option to enable or disable the dynamic VLAN creation function here. Click the Apply button to accept the changes made. GVRP Port This window is used to view and configure the GVRP port settings. To view the following window, click L2 Features > VLAN > GVRP > GVRP Port, as shown below: Figure 5-23 GVRP Port Window The fields that can be configured are described below: Parameter Unit From Port / To Port GVRP Status Join Time Leave Time Leave All Time Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select this option to enable or disable the GVRP port status. This enables the port to dynamically become a member of a VLAN. By default, this option is disabled. Enter the Join Time value in centiseconds. This value must be between 10 and 10000 centiseconds. By default, this value is 20 centiseconds. Enter the Leave Time value in centiseconds. This value must be between 10 and 10000 centiseconds. By default, this value is 60 centiseconds. Enter the Leave All Time value in centiseconds. This value must be between 10 and 10000 centiseconds. By default, this value is 1000 centiseconds. Click the Apply button to accept the changes made. 120