D-Link DGS-1510 User Manual - Page 287
Port Security Port Settings, Security > Port Security > Port Security Port Settings
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 287 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide The fields that can be configured for Port Security Trap Rate Settings are described below: Parameter Trap Rate Description Enter the number of traps per second. The range is from 0 to 1000. The default value 0 indicates an SNMP trap to be generated for every security violation. Click the Apply button to accept the changes made. The fields that can be configured for Port Security System Settings are described below: Parameter System Maximum Address Description Enter the maximum number of secure MAC addresses allowed. If not specified, the default value is No Limit. The valid range is from 1 to 6656. Tick the No Limit checkbox to allow the maximum number of secure MAC address. Click the Apply button to accept the changes made. Port Security Port Settings This window is used to view and configure the port security port settings. To view the following window, click Security > Port Security > Port Security Port Settings, as shown below: Figure 9-2 Port Security Port Settings Window The fields that can be configured are described below: Parameter Unit From Port / To Port State Maximum Violation Action Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select to enable or disable the port security feature on the port(s) specified. Enter the maximum number of secure MAC addresses that will be allowed on the port(s) specified. This value must be between 0 and 6656. By default, this value is 32. Select the violation action that will be taken here. Options to choose from are: 276