D-Link DGS-1510 User Manual - Page 39

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter Write Delay Description Enter the interval for periodic writing of the logging buffer to FLASH. This value must be between 0 and 65535 seconds. By default, this value is 300 seconds. Tick the Infinite option, to disable the write delay feature. Click the Apply button to accept the changes made. The fields that can be configured for Console Log Settings are described below: Parameter Console Log State Severity Discriminator Name Description Select to globally enable or disable the state of the console log here. Select the severity value of the type of information that will be logged. Options to choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4 (Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging). Enter the discriminator name used here. This name can be up to 15 characters long. Click the Apply button to accept the changes made. The fields that can be configured for Monitor Log Settings are described below: Parameter Monitor Log State Severity Discriminator Name Description Select to globally enable or disable the state of the monitor log here. Select the severity value of the type of information that will be logged. Options to choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4 (Warnings), 5 (Notifications), 6 (Informational), and 7 (Debugging). Enter the discriminator name used here. This name can be up to 15 characters long. Click the Apply button to accept the changes made. 28