D-Link DGS-1510 User Manual - Page 403
PoE Configuration Window
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 403 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Unit Description Select the unit ID of the Switch in the stack that will be used here. The following icons are available in this window and are described below: Parameter Description This displays the total amount of ONVIF IP cameras connected to the Ethernet ports on the Switch. This displays the total amount of D-Link legacy IP cameras (detected by ASV 1.0) connected to the Ethernet ports on the Switch. This displays the total amount of Network Video Recorders (NVRs) connected to the Ethernet ports on the Switch. This displays the amount of surveillance warnings generated on the Switch. This displays the amount of other devices connected to the Ethernet ports on the Switch. This displays the device connected to the Ethernet port on the Switch. The green border around the image indicates that the device is a non-PoE device. The PD Alive function cannot be used on this device. This displays the device connected to the Ethernet port on the Switch. The blue border around the image indicates that the device is a PoE device and is receiving power from the Switch using PoE. The PD Alive function can be used on this device. Click this icon to disable PoE on the port. Click this icon to enable PoE on the port. After clicking the icon, the following window will appear: After clicking the icon, the following window will appear: Figure 14-2 PoE Configuration Window 392