D-Link DGS-1510 User Manual - Page 357

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Storm Control Settings This window is used to view and configure the storm control settings. To view the following window, click Security > Storm Control Settings, as shown below: Figure 9-85 Storm Control Settings Window The fields that can be configured for Storm Control Trap Settings are described below: Parameter Trap State Description Select the storm control trap option here. Options to choose from are: • None - No traps are sent. • Storm Occur - A trap notification is sent when a storm event is detected. • Storm Clear - A trap notification is sent when a storm event is cleared. • Both - A trap notification is sent when a storm event is detected or cleared. Click the Apply button to accept the changes made. The fields that can be configured for Storm Control Polling Settings are described below: Parameter Interval Retries Description Enter the interval value used here. This value must be between 5 and 600 seconds. By default, this value is 5 seconds. Enter the retries value used here. This value must be between 0 and 360. By default, this value is 3. Tick the Infinite option to disable this feature. Click the Apply button to accept the changes made. 346