D-Link DGS-1510 User Manual - Page 253

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter IP Precedence ToS DSCP Time Range Description • Host - Enter the destination host's IP address here. • IP - The Wildcard option will also be available. Enter the group of destination IP addresses by using a wildcard bitmap. The bit corresponding to the bit value 1 will be ignored. The bit corresponding to the bit value 0 will be checked. Select the IP precedence value used here. Options to choose from are 0 (routine), 1 (priority), 2, (immediate), 3 (flash), 4 (flashoverride), 5 (critical), 6 (internet), and 7 (network). After selecting the IP precedence value, select the Type-of-Service (ToS) value that will be used here. Options to choose from are 0 (normal), 1 (min-monetary-cost), 2 (max-reliability), 3, 4 (maxthroughput), 5, 6, 7, 8 (min-delay), 9, 10, 11, 12, 13, 14, and 15. Select or enter the DSCP value used here. This value must be between 0 and 63. Enter the name of the time range to associate with this ACL rule. Click the Back button to discard the changes made and return to the previous page. Click the Apply button to accept the changes made. To enable the Counter State option or to enter a Remark for the profile, click the Edit button, next to the specific ACL profile (found in the ACL profile table). Figure 8-33 Extended IP ACL (Edit ACL) Window The fields that can be configured are described below: Parameter Start Sequence No. Step Counter State Remark Description Enter the start sequence number here. Enter the sequence number increment here. Select to enable or disable the counter state option here. Enter an optional remark that will be associated with this profile here. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. 242