D-Link DGS-1510 User Manual - Page 268

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide After selecting the ACL profile and clicking the Add Rule button, users can configure the new ACL rule, in the selected ACL profile, as shown below: Figure 8-54 Extended MAC ACL (Add Rule) Window The fields that can be configured are described below: Parameter Sequence No. Action Source Destination Specify Ethernet Type Ethernet Type Description Enter the ACL rule number here. This value must be between 1 and 65535. If this value is not specified, the system will automatically generate an ACL rule number for this entry. Select the action that this rule will take here. Options to choose from are Permit and Deny. Select and enter the source information here. Options to choose from are: • Any - Any source traffic will be evaluated according to the conditions of this rule. • Host - Enter the source host's MAC address here. • MAC - The Wildcard option will also be available. Enter the source MAC address and wildcard value in the spaces provided. Select and enter the destination information here. Options to choose from are: • Any - Any destination traffic will be evaluated according to the conditions of this rule. • Host - Enter the destination host's MAC address here. • MAC - The Wildcard option will also be available. Enter the destination MAC address and wildcard value in the spaces provided. Select the Ethernet type option here. Options to choose from are aarp, appletalk, decent-iv, etype-6000, etype-8042, lat, lavcsca, mop-console, mop-dump, vines-echo, vines-ip, xns-idp, and arp. Enter the Ethernet type hexadecimal value here. This value must be between 0x0 and 0xFFFF. When any Ethernet type profile is selected in the Specify Ethernet Type drop-down list, the appropriate hexadecimal value will automatically be entered. 257