D-Link DGS-1510 User Manual - Page 264

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter DSCP Flow Label Time Range Description Select or enter the DSCP value used here. This value must be between 0 and 63. Enter the flow label value here. This value must be between 0 and 1048575. Enter the name of the time range to associate with this ACL rule. After selecting the Protocol ID, ESP, PCP, SCTP, or None option as the Protocol Type, the following page and parameters will be available, as shown below: Figure 8-48 Extended IPv6 ACL (Add Rule) Protocol ID Window The dynamic fields that can be configured are described below: Parameter Protocol Fragments Source Destination DSCP Description Enter the Protocol ID value used here. This value must be between 0 and 255. Select the Fragments option to include packet fragment filtering. Select and enter the source information here. Options to choose from are: • Any - Any source traffic will be evaluated according to the conditions of this rule. • Host - Enter the source host's IPv6 address here. • IPv6 - The Prefix Length option will also be available. Enter the source IPv6 address and prefix length value in the spaces provided. Select and enter the destination information here. Options to choose from are: • Any - Any destination traffic will be evaluated according to the conditions of this rule. • Host - Enter the destination host's IPv6 address here. • IPv6 - The Prefix Length option will also be available. Enter the destination IPv6 address and prefix length value in the spaces provided. Select or enter the DSCP value used here. This value must be between 0 and 63. 253