D-Link DGS-1510 User Manual - Page 279

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide After selecting the EIGRP, ESP, GRE, IGMP, OSPF, PIM, VRRP, IP-in-IP, PCP, Protocol ID, or None option as the Protocol Type, the following page and parameters will be available, as shown below: Figure 8-64 Extended Expert ACL (Add Rule) EIGRP Window The dynamic fields that can be configured are described below: Parameter Fragments Source IP Address Destination IP Address Source MAC Address Description Select the Fragments option to include packet fragment filtering. Select and enter the source information here. Options to choose from are: • Any - Any source traffic will be evaluated according to the conditions of this rule. • Host - Enter the source host's IP address here. • IP - The Wildcard option will also be available. Enter the group of source IP addresses by using a wildcard bitmap. The bit corresponding to the bit value 1 will be ignored. The bit corresponding to the bit value 0 will be checked. Select and enter the destination information here. Options to choose from are: • Any - Any destination traffic will be evaluated according to the conditions of this rule. • Host - Enter the destination host's IP address here. • IP - The Wildcard option will also be available. Enter the group of destination IP addresses by using a wildcard bitmap. The bit corresponding to the bit value 1 will be ignored. The bit corresponding to the bit value 0 will be checked. Select and enter the source information here. Options to choose from are: • Any - Any source traffic will be evaluated according to the conditions of this rule. • Host - Enter the source host's MAC address here. • MAC - The Wildcard option will also be available. Enter the source MAC address and wildcard value in the spaces provided. 268