D-Link DGS-1510 User Manual - Page 294

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide 802.1X Port Settings This window is used to view and configure the 802.1X port settings. To view the following window, click Security > 802.1X > 802.1X Port Settings, as shown below: Figure 9-13 802.1X Port Settings Window The fields that can be configured are described below: Parameter Unit From Port / To Port Direction Port Control Forward PDU MaxReq Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select the direction here. Options to choose from are Both and In. This option configures the direction of the traffic on a controlled port as unidirectional (In) or bidirectional (Both). The In control direction is only valid when the Host Mode is configured as Multi Host in the Network Access Authentication Port Settings window. Select the port control option here. Options to choose from are: • ForceAuthorized - Specifies that the port is not controlled in both directions. • Auto - Specifies that access to the port for the controlled direction needs to be authenticated. • ForceUnauthorized - Specifies that access to the port for the controlled direction is blocked. Select to enable or disable the forward PDU option here. Enter the maximum required times value here. This value must be between 1 and 10. By default, this option is 2. This option configures the maximum number of times that the backend 283