D-Link DGS-1510 User Manual - Page 89

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter IPv6 DHCP Relay Remote ID Option Description • Keep - Select to discard the packet that already has the relay agent Remote-ID Option 37. • Drop - Select that the DHCPv6 request packet that already has the relay agent Remote-ID option is left unchanged and directly relayed to the DHCPv6 server. Select this option to enable or disable the insertion of the relay agent remote ID Option 37 during the relay of DHCP for IPv6 request packets. Click the Apply button to accept the changes made. DHCPv6 Relay Interface Settings This window is used to configure and display the DHCPv6 relay interface settings. To view the following window, click Management > DHCP > DHCPv6 Relay > DHCPv6 Relay Interface Settings, as shown below: Figure 4-55 DHCPv6 Relay Interface Settings Window The fields that can be configured are described below: Parameter Interface VLAN Destination IPv6 Address Output Interface VLAN Description Enter the VLAN from 1 to 4094 for DHCPv6 relay. Enter the DHCPv6 relay destination address. Enter the output interface for the relay destination. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Delete button to remove the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 78