D-Link DGS-1510 User Manual - Page 234
fixed, Sequence No., Auto Assign, Protocol Type, Protocol ID, dynamic, Source, Prefix Length
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide The fixed fields that can be configured are described below: Parameter Sequence No. Protocol Type Description Enter the ACL rule number here. This value must be between 1 and 65535. Select Auto Assign to automatically generate an ACL rule number for this entry. Select the protocol type option here. Options to choose from are TCP, UDP, ICMP, Protocol ID, ESP, PCP, SCTP, and None. After selecting the TCP option as the Protocol Type, the following section will appear. Figure 8-12 ACL Configuration Wizard (Add Rule for IPv6 ACL) TCP Window The dynamic fields that can be configured are described below: Parameter Source Destination Description Select and enter the source information here. Options to choose from are: • Any - Any source traffic will be evaluated according to the conditions of this rule. • Host - Enter the source host's IPv6 address here. • IPv6 - The Prefix Length option will also be available. Enter the source IPv6 address and prefix length value in the spaces provided. Select and enter the destination information here. Options to choose from are: 223