D-Link DGS-1510 User Manual - Page 153

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide ERPS (G.8032) For more information, refer to Appendix E - ERPS Information. ERPS This window is used to view and configure Ethernet Ring Protection Switching (ERPS) settings. To view the following window, click L2 Features > ERPS (G.8032) > ERPS, as shown below: Figure 5-49 ERPS Window The fields that can be configured are described below: Parameter Ring Name Description Enter the Ethernet Ring Protection (ERP) instance's name here. This name can be up to 32 characters long. Click the Apply button to create an ITU-T G.8032 ERP physical ring. Click the Edit Ring button to modify an ITU-T G.8032 ERP physical ring. Click the Edit Instance button to configure the ERP instance. Click the Show Status button to view the ITU-T G.8032 ERP physical ring's status information. Click the Delete button to delete the specified ITU-T G.8032 ERP physical ring. After click the Edit Ring button, the following window will appear. Figure 5-50 ERPS (Edit Ring) Window The fields that can be configured are described below: Parameter Instance ID Sub Ring Name Description Select the checkbox and enter the ERP instance number here. This value must be between 1 and 32. Select the Specify radio button to configure this parameter as per normal. Select the None radio button to revert this parameter to the default setting. Select the checkbox and enter the physical ring's sub-ring name here. This name can be up to 32 characters long. Select the Specify radio button to configure this parameter as per normal. 142