D-Link DGS-1510 User Manual - Page 24

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide The fields that can be configured are described below: Parameter System Name System Location System Contact Description Enter a system name for the Switch, if so desired. This name will identify it in the Switch network. Enter the location of the Switch, if so desired. This string can be up to 255 characters long. Enter a contact name for the Switch, if so desired. This string can be up to 255 characters long. Click the Apply button to accept the changes made. Peripheral Settings This window is used to configure the environment trap settings and environment temperature threshold settings. To view the following window, click System > Peripheral Settings, as shown below: Figure 3-3 Peripheral Settings Window The fields that can be configured are described below: Parameter Fan Trap Power Trap Temperature Trap Unit Thermal High Threshold Low Threshold Description Click to enable or disable the fan trap state for waning fan event (fan failed or fan recover). Click to enable or disable the power trap state for waning power event (power failed or power recover). Click to enable or disable the temperature trap state for waning temperature event (temperature exceeds the thresholds or temperature recover). Select the switch unit that will be used for this configuration here. Select the thermal sensor ID. Enter the high threshold value of the warning temperature setting. The range is from -100 to 200 degree Celsius. Tick the Default check box to return to the default value. Enter the low threshold value of the warning temperature setting. The range is from -100 to 200 degree Celsius. Tick the Default check box to return to the default value. Click the Apply button to accept the changes made. 13